Home >

Energy Conservatory DG-700 Pressure and Flow Gauge Manometer
Energy Conservatory DG-700 Pressure and Flow Gauge Manometer
DG-700 Pressure and Flow Gauge Manometer
Price: $1,085.00

Request a Formal Quote  

Availability: Currently Unavailable
Product Code: TEC-DG-700


Energy Conservatory DG-700 Pressure and Flow Gauge Manometer

The TEC DG-700 Manometer has been discontinued and is replaced by the TEC DG-1000 Manometer.

DG-700 Features

The new DG-700 Pressure and Flow Gauge is a multi-functional differential pressure gauge with two independent pressure sensors. In addition to providing high-resolution pressure measurements, the DG-700 is programmed to operate with other Energy Conservatory test devices to provide air flow measurements during building performance test procedures. The DG-700's simultaneous display of two pressure channels and air flow measurement features make it ideally suited for a wide range of building performance applications including airtightness testing of buildings and duct systems, air handler flow measurements, building depressurization and combustion safety testing.

  • Simultaneous display of 2 independent differential pressure channels.
  • Bi-directional, precision pressure measurement up to 1,250 Pa (5 inWC). The DG-700 can display pressure readings in both Pascals and inWC.
  • Auto-zeroing of both channels eliminates sensitivity to orientation and temperature, making it perfect for hand-held operation.
  • Four separate time-averaging modes (1, 5, 10 second & long-term) allow you to accurately measure fluctuating pressures.
  • Programmed to display air flow readings for Minneapolis Blower Door and Duct Blaster systems, TrueFlow Air Handler Flow Meter and Exhaust Fan Flow Meter (air flow units can be displayed in cubic feet per minute, cubic meters per hour and liters per second).
  • "Baseline" feature allows the user to measure and record a baseline pressure reading, and then display the baseline adjusted reading.
  • Specialized @50 and @25 test modes make it simple to conduct one-point airtightness tests of buildings and duct systems.
  • The Cruise Control feature allows you to control a Blower Door fan to maintain a constant 75, 50, 25 or 0 Pa building pressure without connection to a computer.
  • The DG-700 includes both a USB and RS-232 port that can be used along with a computer and specialized TEC software to conduct fully automated Blower Door tests (TECTITE software), and for data logging of pressure measurements from both channels (TECLOG software).
  • Programmed to display velocity measurements using a Pitot tube (velocity units can be displayed in both feet per minute and meters per second).
  • Energy Conservatory product code: DIG7CH


  • DG-700 Digital Pressure Gauge
  • Protective carrying case
  • 16 ft (5 m) USB cable
  • USB computer drivers
  • 6 inch long pressure probe
  • 10 ft (3 m) red hose, 15 ft (5 m) green hose
  • Instruction manual

Warranty Information

All products from The Energy Conservatory carry a full two year warranty on parts and labor, and include access to one of the best customer service staffs in the industry.

Share your knowledge of this product. Be the first to write a review »